Gear Head Type Bench Lathe
MODEL ID:PP-1340GH
Gear Head Type Bench Lathe
1. Bed is made of high tensile cast iron FC25.
2. Hardened and ground bedways.
3. D 1-4 camlock spindle.
4. Metric or imperial specification depend on customer's instruction.
Standard Accessories:
1. Motor & Mortor Pulley
2. D 1-4 Back Plate for 6" Chuck
3. D 1-4 Back Plate for 8" chuck
4. Center Sleeve (MT5*MT3)
5. Center (MT3)
6. 4-way Tool Post
7. Change Gears
8. Tool Box & Kits
Option Accessories:
1. Steady Rest
2. Follow Rest
3. Face Plate 10" (250mm)
4. Drill Chuck 1/2" (13mm)
5. Rolling Center (MT3)
6. 3-Jaw Scroll Chuck 6" (160mm)
7. 4-Jaw Independent Chuck 8" (200mm)
8. Floor Stand
9. Coolant Pump System
10. Taper Turning Attachment
11. Quick Change Toolpost
12. Single Saddle Stop
13. 4-Position Saddle Stop
14. Rear Splash Guard
15. Chuck Guard
16. 5C Collet Closer
17. DRO Equipment
18. Work Light
1. Motor & Mortor Pulley
2. D 1-4 Back Plate for 6" Chuck
3. D 1-4 Back Plate for 8" chuck
4. Center Sleeve (MT5*MT3)
5. Center (MT3)
6. 4-way Tool Post
7. Change Gears
8. Tool Box & Kits
Option Accessories:
1. Steady Rest
2. Follow Rest
3. Face Plate 10" (250mm)
4. Drill Chuck 1/2" (13mm)
5. Rolling Center (MT3)
6. 3-Jaw Scroll Chuck 6" (160mm)
7. 4-Jaw Independent Chuck 8" (200mm)
8. Floor Stand
9. Coolant Pump System
10. Taper Turning Attachment
11. Quick Change Toolpost
12. Single Saddle Stop
13. 4-Position Saddle Stop
14. Rear Splash Guard
15. Chuck Guard
16. 5C Collet Closer
17. DRO Equipment
18. Work Light
| MODEL NO. | PP-1340GH |
| Swing Over Bed | 330mm (13") |
| Swing Over Saddle | 165mm (6 1/2") |
| Swing Over Gap | 480mm (19") |
| Distance Between Centers | 1000mm (40") |
| Bed Width | 190mm (7 1/2") |
| Number of Spindle Speeds | 12 |
| Range of Spindle Speeds | 70-1500 RPM |
| Spindle Nose | D1-4 Camlock |
| Taper of Spindle Nose | MT 5 |
| Taper of Tailstock Barrel | MT 3 |
| Travel of Cross Slide | 170mm (6-3/4") |
| Travel of Top Slide | 90mm (3-1/2") |
| Travel of Taistock Barrel | 100mm (4") |
| Number of Metric Threads | 24 |
| Range of Metric Pitches | 0.25-7mm |
| Number of Inch Threads | 40 |
| Range of Inch Threads | 4-112 T.P.I. |
| Main Motor | 1.5 HP/ 1PH or 2HP/ 3PH |
| Net Weight (kgs) w/o stand | 320 |
| Packing Dimensions L*W*H | 1855*760*760mm (73"*30"*30") |
