1. Bed is mad of high tensile cast iron FC25.
2. Hardened and ground bedways.
3. Harden and ground gears in head stock.
4. D 1-4 camlock spindle.
5. Metric or imperial specification depend on customer's instruction.
Standard Accessories:
1. Gap Bed (1340E/ 1440E only)
2. D1-4 Back Plate for 6" Chuck
3. D1-4 Back Plate for 8" Chuck
4. Center Sleeve (MT5*MT3)
5. 4-way Tool Post
6. Complete Electric Control Unit
7. Change Gears
8. Floor Stand
9. 1/8HP Coolant Pump Equipment
10. Rear Splash Guard
11. Rapid Foot Brake
12. Tool Box & Kits
Optional Accessories:
1. Steady Rest
2. Follow Rest
3. Face Piate 10" (250mm)
4. Drill Chuck 13mm (1/2") w/ arbor
5. Rolling Center MT3
6. 3-Jaw Scroll Chuck 6" (160mm)
7. 4-Jaw Independent Chuck 8" (200mm)
8. Taper Turning Attachment
9. Quick Change Tool Post
10. Single Saddle Stop
11. 4-position Saddle Stop
12. Chuck Guard
13. 5C Collet Closer
14. DRO Equipment
15. Work Light
| MODEL NO. | 1324E |
| Swing Over Bed | 330mm (13") |
| Swing Over Cross Slide | 195mm (7-5/8") |
| Swing Over Gap | X |
| Distance Between Centers | 600mm (24") |
| Bed Width | 190mm (7-9/16") |
| Number of Spindle Speeds | 9 |
| Range of Spindle Speeds | 82-2000 RPM |
| Bore Through Spindle | 40mm (1-1/2") |
| Spindle Nose | D1-4 Camlock |
| Taper of Spindle Nose | MT 5 |
| Tailstock Quill Taper | MT 3 |
| Tailstock Quill Travel | 100mm (4") |
| Cross Slide Travel | 165mm (6 1/2") |
| Compound Rest Travel | 100mm (4") |
| Metric Threads | (30 Numbers) 0.4-7.0mm Pitch |
| Inch Threads | (32 Numbers) 4-56TPI |
| Longitudinal Feeds | 12 Nos.(0.068-0.936mm/rev)/ 16 Nos.(0.0026-0.0638"/rev) |
| Cross Feeds | 13 Nos.(0.034-0.468mm/rev)/ 16 Nos.(0.0013-0.0319"/rev) |
| Main Motor | 2HP/ 1PH or 3HP/ 3PH |
| Net Weight (kgs) | 580 |
| Gross Weight (kgs) | 660 |
| Packing Dimensions L*W*H | 1473*762*1473mm (58"*30"*58") |
This site uses cookies to improve your browsing experience. we’ll assume you’re OK to continue. If you want to read more about this, please click Privacy Policy , thank you.